The P12|4 is designed for the woodworker who requires precision and quality without sacrificing too much shop space.
The 51″ sliding table is just big enough to cut a 4-ft. panel, even when using the scoring.Opposing horizontal V-shaped aluminum extrusions traps the steel balls. This design allows the sliding table to cut through dust, chips and other debris almost like scissors with minimal wear and tear.
The P12|4 features compact 51″ V-way sliding table design, 3HP main motor and 3/4 HP scoring motor
The European-style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.
The P12|4 is equipped with two motors operating independently, putting this saw in a class all of its own. Scoring blade adjustment is done with a T-handle through the cast iron table top. From here you can make both vertical and lateral adjustments in no time.
Optional steel table is available to mount on the out-feed side of the saw for added support. The P12|4 is pre-drilled to accept the 12″ x 32″ table.
Technical Specs
Motor: 3HP Main
Motor: 3/4 HP Scoring
Volt: 220, 1 phase, 60 Hz.
Blade Capacity: 12”, 14”/300mm, 355mm
Max. Blade: 14”/355mm (minimum height when lowered: 1”/25mm)
Max Scoring Blade: 4-3/4”/120mm
Scoring Adjustment: T-Handle through Cast Top
Arbor: 30mm Main, 20mm Scoring
Max Cutting Height 90° 14”/355mm Blade: 4-1/2”/115mm
Max Cutting Height 90° 12”/305mm Blade:3-1/2”/90mm
Max Cutting Height 45° 14”/355mm Blade: 2-3/4”/70mm
Max Cutting Height 45° 12”/305mm Blade: 2-3/8”/62mm
Main Blade Speed: 4000 RPM
Scoring Blade Speed: 8000 RPM
Dust Collection Port Saw: 5”/125mm
Dust Collection Port Guard: 2-1/2”/ 65mm
Sliding Table: 51”/1300mm
Sliding Table Width: 12-3/8”/316mm
Main Cast Table: 21-1/2” x 35-1/4”
Rip Fence: 51”/1300mm
Rip Fence Micro Adjust, and Push handle are included
Rip Fence Bar: 1-5/8”/40mm Solid Steel Micro Polished
